top of page
_edited_edited.png){kind=small}
CD 200
CD 200
Multioperational Geotechnical
Probe for SPT + Core Drilling
SPT
40~50m
Core Drilling ØA
60~80m
Core Drilling ØB
50~70m
Core Drilling ØN
30~40m
Core Drilling ØH
20~30m
SPT with an Assistant and an Operator
With the Automated System you can do all the percussion work without excessive physical effort with an assistant and an operator. Making the service safer, with quality and efficiency.
Quality Core
Samples
Rotary core sampling system with
capacity of up to 80M*.
*Drilling capacity depends on soil conditions, tools and also correct operation of the equipment.
Operational Accessories
Vise / Tool Extractor
Hydraulic vise/tool ​​extractor system with 8000 kgf. Allows for easy removal of tools from the most compact and difficult to extract soils.
Hydraulic Winch
Hydraulic winch system to assist in extracting rods during operating processes. Increasing safety and facilitating drilling.
Hydraulic Leveling
Hydraulic leveling system, with individual activation at the four points of the equipment. Allowing greater level control during operation.
Course for
Rods up to 1.5M
The probe has the capacity to perform probing
with tools up to 1500mm long.
Self-Propelled Tracks
Self-propelled rubber tracks that allow easy and simple movement of equipment.
Tool Support
Engine Protections
Electrical System
Safety First
Built for Safety
The CD 200 has a set of protections and safety systems to protect and alert the operator and assistant during equipment operation.
Audible and
Visual Alerts
The equipment has a rotating beacon system that alerts the team about the equipment's movement. There are also audible alerts to increase operational safety.
Easy to
Carry
Transport your probe in trailers, vans or small trucks.
Making transportation logistics easier and more cost-effective.
CD 200 Specifications
Engine
Engine Power
39 cv
Cylinders
4 Cylinders
Fuel
Diesel
Average Consumption*
7,3 l/h
Max. Rotation
3000 RPM
Maximum Torque
15,30 kgf.m
Dimensions
Weight
2100 kg
Length
3010mm
Width
2300mm
Min. Height
1960mm
Max. Height
4310mm
Automatic Drop Hammer
Hammer Weight
63,5 Kg
Drop Height
750mm
Drive
Hydraulic
Standard
ASTM D1586
Rotary System
Max. Rotation
0 - 450 RPM
Max. Torque
400 Nm
Speed
Triple
Drilling Angle
90º
Drilling Capacity*
SPT (Recommended)
40M
Core Drilling ØB (Recom.)
50M
SPTa (Max.)
50M
Core Drilling ØB (Max.)
70M
Core Drilling ØA (Recom.)
60M
Core Drilling ØA (Max.)
80M
Core Drilling ØN (Recom.)
30M
Core Drilling ØN (Max.)
40M
Warranty**
Structure & Systems
12 Months
Engine
6 Months
*Drilling capacity depends on soil conditions, tools and also on the correct operation of the equipment.
**Final warranty valid in accordance with the terms of your equipment invoice.
Core Drilling ØH (Recom.)
20M
Core Drilling ØH (Max.)
30M
bottom of page